Assembly manuals

Every workstation ships flat-packed with an assembly manual. You can also download it here at any time.

Before you start

  • Allow two people and a couple of hours. The parts are heavy.
  • Lay parts out on a soft surface or on the crate cardboard so edges are not damaged.
  • Leave every bolt finger-tight until the frame is fully assembled, then tighten in order. This is the single most common cause of a desk that will not square up.
  • M6 rack screws are not included and are available separately.

3D assembly guide

Some models have an interactive 3D assembly guide that steps through the build and shows which fixings belong at each stage. Open the product page and add ?view=assembly to the address, for example busoaudio.com/products/producer-xl?view=assembly.

Download your manual

If your model is not listed, or you would rather not build it yourself, contact us. We also offer an assembly service.

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us